Salon glow pro led lamp

Power. Precision. Performance. The Mitty Glow Pro LED Cordless Lamp isn’t just another lamp, it’s a beauty game-changer built to give you salon-perfect nails anywhere, anytime. Whether you're a seasoned nail tech or a DIY queen, this lamp will level up your glow game like never before.

User manual - salon glow pro led lamp

1. Power socket
2. 10s / Buzzer switching button
3. 30s / Display switching button
4. 60S / High power switching button
5. 90S / Low power switching button
6. On/Off switch
7. Digital display
8. Infrared sensor
9. Carry handle

03. PRODUCT INSTRUCTIONS

  • The Mitty Salon Glow Led Nail Lamp is designed for professional manicurists.
  • Suitable for fast curing gel products, gel systems and extension gel.

04. OPERATING INSTRUCTIONS

  1. Use the original 12.6V 1.9A adapter. Using an incorrect adapter may damage the device or prevent full charging.
  2. Turn on the power switch. The default timer is set to 60 seconds.
  3. Place your hand inside the lamp to start the countdown. The lamp will automatically turn off after 60 seconds. If the hand is removed early, the lamp stops and resets the timer.
  4. Press the 10S, 30S, 60S, or 90S button to start the timer. The LED display will count down the selected time.
  5. Press and hold the 60S button for 1.5 seconds. The display will show "HXX". Ideal for curing dark or hard gel colors.
  6. Press and hold the 90S button for 1.5 seconds. The display will show "LXX" and power output will reduce to 60%. Helps prevent heat spikes.
  7. Press and hold the 30S button for 1.5 seconds to flip the LED screen display toward the user.

05. TECHNICAL SPECIFICATIONS

  • : 365nm + 405nm UV, 42 pcs
  • : 36W
  • : ~600W CCFL lamp
  • : 100V–240V, 50/60Hz
  • : DC 12.6V 1.9A
  • : 11.1V, 5200mAh, 57.72Wh
  • : 246 × 200 × 90mm

06. SAFETY CAUTIONS

  1. Read all instructions carefully before use.
  2. Charge the device fully before the first use.
  3. Recharge the battery every 3 months if not used regularly to prevent power degradation.
  4. If the battery won’t charge or power the machine, it may be faulty. Do not use it to avoid safety risks.
  5. Always turn off the power after use to preserve battery life.
  6. Avoid using nail gel remover, alcohol, or other chemicals on the machine to prevent damage.
  7. If the adapter is damaged, stop using it immediately to prevent electric shock.
  8. Do not exceed 600 seconds of continuous lighting to extend product lifespan.
  9. Do not look directly in the led light.
  10. Avoid using the device while it is charging.
  11. Always use the original 12.6V 1.9A adapter. Incorrect voltage may cause the unit to beep and show "OU" on the display.

FAQs

Charge the lamp fully before first use. A full charge typically takes 4 hours.

No, for safety and to protect the battery, do not use the lamp while it's charging.

No. Avoid using alcohol, acetone, or harsh chemicals. They can damage the lamp and reduce its lifespan.

Press and hold the 30S button for 1.5 seconds to switch the screen orientation.

High Power Mode: Press and hold the 60S button for 1.5 seconds.