Portable Nail Drill - White with desktop clock charger

Say hello to your new fave nail companion—your electric nail drill machine! Whether you're lefty or righty, this powerhouse was made for you. It spins forward, backward, and everywhere in between with speeds from 0 to a lightning-fast 45,000 RPM.

Portable Nail Drill - White with desktop clock charger

1. Digital display
2. On/Off button, speed control, Pause/Start button
3. Forward and reverse button
4. Motor socket
5. Type-C USB socket
6. Handpiece holder
7. Handpiece rack
8. Power adapter
9. Belt clip
10. Type-C USB cable
11. Handpiece Body
12. Handpiece lock chuck
13. Handpiece hand
14. Battery clock charging dock

🌀 Smooth Moves Only

Equipped with a comfy, quiet handpiece and flexible extension, this drill gives you buttery-smooth rotations for flawless nail finishing—no stress, no noise.

⚡ Ready to Go the Distance

Charge it for 3 hours and get up to 8–10 hours of non-stop glam time. Perfect for on-the-go pros or all-day self-care sessions.

🛡️ Safety First, Always

Overload? No drama. The built-in protection system shuts things down to keep you (and your drill) safe. Just switch it off, take a breath, and restart.

🐾 More Than Nails

Not just for manis and pedis! This little beast handles calluses, polishes, shapes, grinds, sands, and even preps nails for your furry friends. Yes, pet sanding is a thing—and it rocks.

Important Notes – Read Before You Nail It!

  • Lock it smart! When you twist the lock chuck during use, the main motor will instantly shut off to protect itself. (Yep, your motor's got self-preservation instincts! Be gentle—it extends its life!)
  • Restarting? Do this first: Before powering back on, make sure the speed dial is turned to "0". Then you're good to go!
  • What’s that smell? A slight burning scent from the handle is totally normal. It’s just the heat doing its thing. Nothing to worry about!

Operation

1. Connect the adapter into the power supply socket to charge the nail drill
2. Then connect the handpiece into the three core socket
3. Upload the desired nail drill bit

4. Variable speed control button with play/pause function

A- Turn on the button, the speed is increased by "01" x1000 RPM, ajust the higher by increased to "05" x1000 RPM
B- Press on the button to start play/pause fuction.
Press once, the machine is imediately in pause state.
Press twice the machine will restart in play state.

5. Foward/Reverse button

The default direction is "F" (Forward direction),
Press once to change into "R" Reverse direction
Press twice to change into "F" Forward direction again

How to adjust the battery clock charging dock

1. Press "ON/OFF" butTon to turn on the clock
2. Press "12/24 TIME SET" button to change the timer to AM or PM
3. Hold "12/24 TIME SET" button until the digital is flashing, then choose "+" or "-" button to firstly modify the hours, short press again to save, then modify and save the changes for minutes, and the modify ans save the changes on weeks from MON to SUN.

Handpiece Operation

1.Holding handpiece in hand and turning the set ring toward (clockwise) direction until you hear the click.
2. Take out the test bar.
3.Insert your desired bit into the handpiece.
4.Turning back the set ring to (anti-clockwise) direction until the collet is secured.

Precautions

1.Only use supplied power adaptor
2.Stop operation of drill if any abnormal movement/noise is noticed during operation.
3.Adjust the speed gradually.
4.Do not touch and rotating part when the drill is working
5.Stop the drill to change the direction.
6. Do not place a cloth or anything else on the ventilation slides of the controller, and keep dust free.

FAQs

The digital display shows your current RPM (rotations per minute), allowing you to monitor and fine-tune speed with precision. It also displays status indicators like pause, play, and battery life.

Use the speed control dial to increase or decrease RPM from 1,000 to 5,000 RPM (displayed as 01–05 on screen).

Tap the Pause/Start button once to pause the drill instantly. Tap it again to resume where you left off—easy peasy!

This is where you plug in the handpiece. It’s the heart of the operation, so make sure it's securely connected before you start.

Plug the included Type-C USB cable into the Type-C socket and connect it to the power adapter. A full charge takes 3 hours and gives you up to 8–10 hours of glam time

It's a dual-function base! It charges your drill and displays the time. You can set it to 12 or 24-hour format. Use the buttons on the dock to adjust hours, minutes, and day of the week.